SS304/SS316 Stainless Steel Flange Flexible Universal Joint E-type Spherical Compensator
Product Introduction
Spherical compensation joints are mainly suitable for pipeline connections with large ground subsidence, large vibration and complex terrain. After being installed on the pipeline, the sphere can rotate freely in the θ angle range with the center of rotation to compensate for the deflection of the pipeline caused by foundation settlement, thermal expansion and cold contraction. It has the advantages of large amount of compensation, small space occupied, small fluid resistance, easy installation and low comprehensive cost.
Features
1. Multi-dimensional orientation can be compensated. Various forms, large compensation amount, long life
2. It can effectively compensate or eliminate installation errors
3. Low stiffness and small elastic reaction
4. High applicable temperature range and good corrosion resistance
5. It can effectively isolate vibration and reduce noise
Product application field
1. Light industry
2. Textile industry
3. Power industry
4. Environmental protection industry
5. Urban water supply and drainage industry
6. Aerospace industry
Product parameters
| Product name | Ball compensation joint E-type compensator |
| Size | DN50-DN1200 |
| Material | carbon steel,stainless steel |
| Application | Pipe Lines Connect |
| Working Pressure | 0.6 Mpa ~4.0 Mpa |
| Working Temperature | -40-350℃ |
| The main connection size |
| DN | Max radial diameter | Turning distance | Interface size | Weight |
| Flange connections | 1.0Mpa | 1.6Mpa | 2.5Mpa |
| 1.0Mpa | 1.6Mpa | 2.5Mpa | 4.0Mpa | Takeover | Flange | Takeover | Flange | Takeover | Flange |
| 50 | 180 | 0.07 | 0.11 | 0.17 | 0.28 | φ57×3.5 | 18 | 23 | 18.8 | 23.8 | 23 | 29 |
| 65 | 198 | 0.14 | 0.23 | 0.36 | 0.58 | φ73×4 | 26 | 31 | 27 | 33 | 32 | 39 |
| 80 | 225 | 0.32 | 0.51 | 0.8 | 1.285 | φ89×4 | 37 | 45 | 38 | 46 | 45 | 53 |
| 100 | 260 | 0.54 | 0.86 | 1.34 | 2.15 | φ108×4 | 56 | 66 | 58 | 68 | 70 | 82 |
| 125 | 300 | 1.04 | 1.67 | 2.61 | 4.18 | φ133×4 | 77 | 87 | 79 | 91 | 95 | 111 |
| 150 | 375 | 1.52 | 2.43 | 3.8 | 6.08 | φ159×4.5 | 85 | 99 | 87 | 101 | 105 | 125 |
| 200 | 440 | 2.15 | 3.45 | 5.39 | 8.63 | φ219×5 | 118 | 137 | 121 | 141 | 145 | 176 |
| 250 | 540 | 4.22 | 6.75 | 10.55 | 16.88 | φ273×6 | 238 | 262 | 243 | 271 | 290 | 330 |
| 300 | 608 | 6.34 | 10.15 | 15.86 | 25.38 | φ325×6 | 334 | 360 | 338 | 375 | 405 | 457 |
| 350 | 685 | 8.31 | 13.30 | 20.78 | 33.25 | φ377×8 | 503 | 546 | 514 | 569 | 615 | 696 |
| 400 | 780 | 10.83 | 17.32 | 27.06 | 43.30 | φ426×8 | 584 | 645 | 596 | 665 | 715 | 822 |
| 450 | 825 | 15.34 | 24.55 | 38.36 | 61.38 | φ480×8 | 846 | 911 | 864 | 956 | 820 | 947 |
| 500 | 900 | 20.81 | 33.30 | 52.03 | 83.25 | φ529×8 | 965 | 1045 | 985 | 1111 | 1150 | 1315 |
| 600 | 1055 | 26.22 | 41.95 | 65.55 | 104.87 | φ630×8 | 1345 | 1449 | 1375 | 1640 | 1647 | 1895 |
| 700 | 1300 | 31.78 | 50.84 | 79.44 | 127.1 | φ720×8 | 1524 | / | 1555 | / | 1866 | / |
| 800 | 1450 | 38.26 | 61.22 | 95.65 | 153.05 | φ820×10 | 1700 | / | 1735 | / | 2080 | / |
| 900 | 1630 | 45.20 | 72.32 | 113.05 | 180.80 | φ920×10 | 1876 | / | 1915 | / | 2298 | / |
| 1000 | 1810 | 52.74 | 84.38 | 131.84 | 210.95 | φ1020×10 | 2058 | / | 2100 | / | 2520 | / |
| 1100 | 1990 | 60.91 | 97.46 | 152.28 | 243.65 | φ1120×12 | 2370 | / | 2425 | / | 2880 | / |
| 1200 | 2170 | 69.78 | 111.65 | 174.45 | 279.13 | φ1120×14 | 2795 | / | 2860 | / | 3280 | / |
Preparation and inspection of the product before installation
1. Before installation, the appearance of the spherical compensator should be carefully inspected to ensure that it is not damaged or deformed, and to confirm that its specifications match the piping system to be installed.
2. Prepare the required installation tools, such as wrenches, screwdrivers, pipe cutters, etc., to ensure that the tools are complete and in good condition.
3. Check whether the specifications and models of the compensator are completely consistent with the design drawings or customized requirements, including key parameters such as diameter, length, material, working pressure and temperature range.
Product installation steps
1. Use a pipe cutter to cut the pipe to the appropriate length to ensure that the end face of the pipe is flat, smooth and free of burrs.
2. Place the spherical compensator on the cut pipe, make sure that the ball of the compensator coincides with the pipe axis, and use a wrench to fasten the connector.
3. According to the design requirements, use brackets or hangers to fix the spherical compensator in the appropriate position to ensure that it is stable and reliable, and will not be displaced due to pipeline vibration.
4. After the installation is completed, check the sealing performance of the spherical compensator to ensure that there is no leakage.
Product installation precautions
1. Ensure that the coaxiality between the spherical compensator and the pipeline is not more than 3mm, and the unilateral misalignment is not more than 2mm.
2. Arrange the spherical compensator as close to the elbow as possible, and lengthen the spherical centroid distance to reduce mutual influence.
3. Temporary support devices should be added at both ends of the spherical compensator, and the temporary facilities should be removed after the pipeline is installed and fixed, and whether there is uneven settlement.
4. The two pipe racks near the spherical compensator should be equipped with guides.
Inventory display
Our service
1. Our products are of good quality and competitive price
2. We accept small order quantity
3. We support OEM service
4. All of our products are guaranteed for one year, reliable after-sales
5. We ship fast
6. We have rich production experience, with more than 20 years of production experience
7. Our products are exported to more than 30 countries to provide experienced and professional services to overseas customers.
Product Tags:
|
|
SS304/SS316 Stainless Steel Flange Compensator Universal Joint E-Type Spherical Compensator Images
|
